- Surface Area & Gas Adsorption
- Pore Size
- Representative Sampling
- Particle Size
- Particle Shape
- Dynamic Vapor Sorption (DVS)
- Zeta Potential
Please register for our newsletter on the contact us page.
For more information about nanoparticles, please visit our sister site Microfluidics UK.
Porometer 3G Series
Through-Pore Size Analyzers
RS 3G micro, 3G macro, 3Gz and 3Gzh are latest generation capillary flow porometers. Using the technique known as liquid expulsion, they measure pore size distributions and other related information of through-pores. In this technique, an increasing pressure is applied to one side of a wetted porous sample while pressure and flow rate are monitored. As the pressure is increased, the pores in the sample are progressively emptied (largest through-pore first, then smaller ones). The flow rate through the emptied pores is recorded and used together with the pressure to provide information such as the maximum pore size, the mean flow pore size and full pore size distributions.
Click here for more information.
The 3G porometers can also generate gas permeability information from the pressure and flow rate data.
The Porometer 3G series provides exceptional performance in compact desk top units. They are equally appropriate for material science testing labs, research and development and quality control departments. The pore size ranges of the 3G porometers is shown visually in the graphic below.
Porometer Instruments Pore Size Range (microns)
The flagship porometer for research applications. This capillary flow porometer has the widest pore size measurement range in the series, with both low and high flow rate sensing capability as standard. The pressure capability of up to 500 psi allows for pore sizes from 500 µm down to as small as 18nm to to be measured quickly and reproducibly. Its measurement flexibility means that the 3G zh is appropriate for characterizing the widest variety of materials.
The Porometer 3G z is a compact, automatic, broad size range capillary flow porometer, customizable with a wide range of available flow rates sensors. The 3G z is therefore the ideal porometer for samples of controlled geometric size and through-porosity since these parameters, not just pore size, significantly control absolute gas flow through the sample.
The Porometer 3G macro is the preferred capillary flow porometer for large pore sizes because of its low pressure and high flow rate capabilities. Low pressure control and sensing allows for high resolution pore size measurements up to 500 µm (and larger) to be made, perfect for a wide variety of woven and non-woven materials like diapers, wipes, coarse cleaner and air filters, etc.
The Porometer 3G micro is our entry level capillary flow porometer with small-to-medium pore size capability, and customizable flow rate options. Choose from 100psi or 150 psi maximum pressure, and flow rates of 20, 100 or 200L/min. The 3G micro is especially suitable for a wide variety of woven and non-woven materials having narrower pore size distributions.
Read more about pore size distribution and analysis.
For more information contact us.